From the component :
Probes of the tester should be applied on to the related connectors as shown on the
pictures
Pressure switch:
From the electronical card:
∞ Ω THERE
CN2.10 – CN2.2
0 Ω THERE ISN’T WATER
Above sketch show the connectors of the pressure switch on t
he electronical card.
Probes of the tester should be applied on to the related connectors.
From the component:
Probes of the tester should be applied on to the related
connectors as shown on the pictures
ORANGE
BROWN
CONNECTORS SHOULD BE MEASURED
58
To Next Page
Loading...
