Russell Hobbs RHDW1

RED
RED
NTC SENSOR:
From the electronical card:
CN 3.1 - CN 3.2
25°-5000Ω-
%±5.0
35°-3300Ω-
%±5.5
55°-1520Ω-
%±6.5
63°-1174Ω-
%±7.5
80°- 670Ω -%±8.0
90°- 488Ω -%±8.5
.
Above sketch show the connectors of NTC sensor on the electronical card. Probes of
the tester should be applied on to the related connectors.
From the component:
Probes of the tester should be applied on to the relate
d connectors as shown on the
pictures
Diverter :
From the electronical card :
CN6.1 – CN 2.9 6840 Ω-
%±5.0
Sketch at the side show the connectors of
the diverter on the electronical card.
Probes of the tester should be applied on
to the related connectors.
ELECTRONİCAL CARD
CONNECTOR
EECTRONİCAL CARD
CONNECTOR
BLACK
CONNECTORS SHOULD BE MEASURED
WHITE
RED
CONNECTORS SHOULD BE MEASURED
59