Ryobi TSS101L - Features; Product Specifications

10
FEATURES
Fig. 2
PRODUCT SPECIFICATIONS
Blade Arbor .............................................................. 5/8 in.
Blade Diameter .......................................................... 10 in.
No Load Speed .................................... 5,000 r/min. (RPM)
Input ....................................... 120 V, AC only, 60 Hz, 13 A
Cutting Capacity with Miter at 0°/Bevel 0°:
Maximum nominal lumber sizes: ............................2 x 12
Cutting Capacity with Miter at 45°/Bevel 0°:
Maximum nominal lumber sizes: ..............................2 x 8
Cutting Capacity with Miter at 0°/Bevel 45°:
Maximum nominal lumber sizes: ............................2 x 12
Cutting Capacity with Miter at 45°/Bevel 45°:
Maximum nominal lumber sizes: ..............................2 x 8
Switch
triGGer
BeVel
Scale
duSt
BaG
BeVel
lock
leVer
Miter Fence
taBle
eXtenSion
BaSe
work
claMP
Miter
taBle
control
arM
Miter
lock handle
throat
Plate
“no handS
Zone” laBel
“no handS Zone”
BoundarY line
Miter
Scale
uPPer Blade
Guard
lower Blade
Guard
“d”
handle
Slide lock
knoB
Slide
Bar
work
ShaFt knoB
SuPPort
Foot