Saab 9-4X Owner Manual - 2011
Vehicle Care 10-41
3. Remove the two screws from the
taillamp assembly.
4. Pull the taillamp assembly
straight back to remove.
A. Stoplamp
B. Turn Signal Lamp
5. Turn the turn stoplamp (A) or
turn signal lamp (B) bulb socket
counterclockwise to remove it
from the taillamp assembly.
6. Pull the bulb straight out from
the socket.
7. Press a new bulb into the
socket, insert it into the taillamp
assembly, and turn the bulb
socket clockwise.
8. Reinstall the taillamp assembly
and tighten the screws.
9. Reinstall the taillamp cover by
snapping it into place.
To Next Page
Loading...
