Saab 9-4X 2011 - Taillamps and Turn Signal; Lamps

Black plate (40,1)
Saab 9-4X Owner Manual - 2011
10-40 Vehicle Care
Front Turn Signal Lamp
(Base and Uplevel)
To replace the front turn
signal lamp:
1. Remove the turn signal lamp
bulb socket from the headlamp
assembly.
2. Remove the turn signal lamp
bulb from the socket.
3. Replace the bulb in the bulb
socket.
4. Install the bulb socket in the
headlamp assembly.
Taillamps and Turn Signal
Lamps
A. Stoplamp
B. Turn Signal Lamp
To replace one of these bulbs:
1. Open the liftgate. See Liftgate
on page 2‑12.
A. Taillamp Assembly
B. Taillamp Cover
2. Remove the taillamp cover (B)
from the lamp assembly (A) by
pulling rearward to unfasten it
from the tabs and clips.