Saab 9-4X 2011 - Back-Up Lamps; License Plate Lamp

Black plate (42,1)
Saab 9-4X Owner Manual - 2011
10-42 Vehicle Care
Back-Up Lamps
To replace one of these bulbs:
1. Open the liftgate. See Liftgate
on page 2‑12.
2. Remove the top trim panel from
the liftgate to gain access to
the bulb.
3. Turn the back‐up bulb socket
counterclockwise to remove it
from the taillamp assembly.
4. Pull the bulb straight out from
the socket.
5. Press a new bulb into the
socket, insert it into the taillamp
assembly, and turn the bulb
socket clockwise until it clicks.
6. Reinstall the top trim panel into
the liftgate by locking it into
place.
License Plate Lamp
To replace one of these bulbs:
1. Open the liftgate. See Liftgate
on page 2‑12 for more
information.
Passenger Side Shown, Driver
Side Similar
2. Push the left end of the lamp
assembly toward the right.
3. Turn the lamp assembly down to
remove it from the liftgate.