194 Vehicle care
3. Rotate bulb holder counterclock‐
wise to disengage. Withdraw the
bulb holder from the housing.
4. Push bulb into socket slightly, ro‐
tate counterclockwise, remove
and renew bulb.
5. Insert bulb holder in housing, ro‐
tate clockwise to engage.
6. Insert turn signal housing and fit
with the screw.
7. Insert and engage cover plate.
Uplevel version
1. Remove cover plate by turning out
the screw at the highlighted area
in the graphic.
2. Turn out the screw and remove
the turn signal housing.
3. Rotate bulb holder counterclock‐
wise to disengage. Withdraw the
bulb holder from the housing.
To Next Page
Loading...
