Vehicle care 193
2. Rotate bulb holder counterclock‐
wise to disengage. Withdraw the
bulb holder from the reflector.
3. Push bulb into socket slightly, ro‐
tate counterclockwise, remove
and renew bulb.
4. Insert bulb holder in reflector, ro‐
tate clockwise to engage.
5. Fit cap and rotate clockwise.
Front turn signal
Base version
1. Remove cover plate by unlatching
with a screwdriver at the highligh‐
ted area in the graphic.
2. Turn out the screw and remove
the turn signal housing.
To Next Page
Loading...
