192 Vehicle care
2. Rotate bulb holder counterclock‐
wise to disengage. Withdraw the
bulb holder from the reflector.
3. Detach bulb from bulb holder and
renew the bulb.
4. Insert the bulb holder, engaging
the two lugs into the reflector.
5. Rotate bulb carrier clockwise as
far as it will go.
6. Fit cap and rotate clockwise.
Daytime Running Lamps (DRL)
1. Rotate cap 2 counterclockwise
and remove.
2. Rotate bulb holder counterclock‐
wise to disengage. Withdraw the
bulb holder from the reflector.
3. Extract bulb from bulb holder and
renew the bulb.
4. Insert bulb holder in reflector, ro‐
tate clockwise to engage.
5. Fit cap and rotate clockwise.
Parking lamps
1. Rotate cap 2 counterclockwise
and remove.
To Next Page
Loading...
