Operating Mower - Page 35
OPERATING MOWER
Engaging Mower
1. START engine.
2. Move throttle lever (A) to the FAST (
r
) position.
3. Lower mower to cutting height.
4. Pull PTO switch (B) up to ENGAGE mower.
NOTE: Any operating attachment and the engine
will stop as the gear shift lever is moved to the R
(REVERSE) position (Gear transmission) or the
REVERSE foot pedal is depressed (Automatic
transmission) with attachment engaged.
5. Disengage PTO before shifting to REVERSE.
Disengaging Mower
1. Push PTO switch (A) down to DISENGAGE mower.
2. If you hit an object with mower while mowing, STOP
mower and engine immediately. Inspect mower for
damage.
IMPORTANT: Operate mower at HIGH IDLE/
Mowing (
a
) position when mowing or after mower
blades are engaged.
Machine may require 2-3 minutes warm-up period
before engaging the mower deck.
To Next Page
Loading...
