Service Electrical - Page 60
SERVICE ELECTRICAL
Replacing Fuse
1. Lift hood.
2. Pull defective fuse (A) out of socket.
3. Check metal clip in fuse window and discard fuse if
clip is broken.
4. Push new fuse into socket.
5. Lower hood.
Replacing Headlight Bulb
1. Lift hood.
2. Push in and turn bulb socket (A) 1/4 turn
counterclockwise to remove.
3. Replace defective bulb(s) with a new bulb.
4. Insert bulb socket into housing, push in and turn 1/4
turn clockwise to install.
5. Lower hood.
Replacing Battery Discharge Indicator Light
Bulb
1. Lift hood.
2. Turn indicator bulb socket (A) to the left to remove it.
3. Pull bulb from socket.
4. Push new bulb into socket and install socket into
holder.
5. Lower hood.
To Next Page
Loading...
