Sabre 1848GV - SERVICE MOWER; Mower Blade Safety and Lubrication

Service Mower - Page 49
SERVICE MOWER
Avoid Injury From Contacting Blades
Grease
Use grease based on the expected air temperature
range during the service interval.
The following greases are preferred:
• John Deere Moly High Temperature EP Grease.
• John Deere High Temperature EP Grease.
• John Deere GREASE-GARD

.
Other greases may be used are:
• SAE Multipurpose EP Grease with 3 to 5 percent
molybdenum disulfide.
• SAE Multipurpose EP Grease.
• Greases meeting Military Specification
MIL-G-10924C may be used as arctic grease.
c
CAUTION: To avoid injury, before you unplug,
adjust or service mower:
- DISENGAGE PTO switch to stop mower
blades.
- Wait for mower blades to STOP.
- LOCK the park brake.
- STOP the engine.
- Remove the key.
Clean unit by removing all grass clippings
and dirt from mower deck.
Disconnect spark plug wire from spark plug.
TS1417
122°F
104°F
86°F
68°F
50°F
32°F
14°F
- 4°F
- 22°F
- 40°F
- 67°F
40°C
30°C
50°C
20°C
10°C
0°C
- 10°C
- 20°C
- 30°C
- 40°C
- 55°C
JD Moly High Temp
JD High Temp EP
GREASE-GARD
BIO-GREASE-GARD
Arctic Grease
NGLI Number 0
NGLI Number 1
NGLI Number 2