Service Engine - Page 44
SERVICE ENGINE
Avoid Fumes
Engine Oil
Use oil viscosity based on the expected air temperature
range during the period between oil changes.
The following John Deere oils are preferred:
• John Deere PLUS-4®
Other oils may be used if they meet one of the following
specifications:
• API Service Classification SG
• API Service Classification SF
• CCMC Specification G4
Oils meeting Military Specification MIL-L-46167B may
be used as arctic oils.
Checking Engine Oil
1. Park tractor on a level surface.
2. STOP engine.
3. Lift hood.
4. Remove dipstick (A). Wipe with clean cloth.
5. Install dipstick in tube, tighten dipstick, remove
dipstick, and check oil level.
6. Oil must be between ADD and FULL marks.
7. Add oil to FULL mark if necessary. DO NOT overfill.
8. Install and tighten dipstick. Lower hood.
c
CAUTION: Engine exhaust fumes can cause
sickness or death:
- If it is necessary to run an engine in an
enclosed area, use an exhaust pipe extension
to remove the fumes.
- Always try to work in a well ventilated area.
c
CAUTION: To prevent injury from accidental
starting, always remove wire from spark plugs
and disconnect battery at negative terminal
before servicing engine.
To Next Page
Loading...
