EasyManua.ls Logo

Sabre 1848GV - Page 79

Default Icon
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting - Page 75
TROUBLESHOOTING
Patches Of Grass Uncut Travel speed too fast.
Engine rpm too low.
Belt Slipping Debris in sheaves.
Worn belt.
Too Much Vibration Debris on mower deck or in sheaves.
Damaged drive belt.
Damaged sheaves or sheaves out of alignment.
Blades out of balance.
Blades Scalping Grass Cutting too low.
Turning speed too fast.
Ridges in terrain.
Rough or uneven terrain.
Low tire pressure.
Mower gauge wheels not adjusted correctly.
Bent blade(s).
Uneven Cut Mower not level.
Travel speed too fast.
Blades dull.
Mower gauge wheels not adjusted correctly.
Tire pressure.
Requires High Effort To Lift And Latch Lift
Handle
Front draft arm on mower is adjusted too short, causing
lift system to bind up.
Mower Loads Down Tractor Engine rpm too low.
Travel speed too fast.
Debris wrapped around mower spindles.
Bagging blades on mower.
Grass Tips Are Jagged And Turn
Grayish Brown After Mowing
Dull mower blades.
Bent blades.
Front-to-rear blade adjustment not set properly.
IF CHECK

Table of Contents

Related product manuals