Why milk does not froth in my Saeco Incanto HD8917?
If milk does not froth in your Saeco Coffee Maker, the milk carafe may be dirty or incorrectly placed. Clean the carafe as described in the '7.4.3 Weekly cleaning of the milk carafe components' chapter, and insert it in the machine as shown in the '6.2 Milk carafe' chapter, 'Inserting phase'.
What does water circuit error mean for Saeco Incanto HD8917 Coffee Maker?
If your Saeco Coffee Maker displays a water circuit error, it may be due to air in the water circuit. Remove and restore the water tank a couple of times, making sure it is correctly positioned. Also, check that the water tank seat is clean.
Why is the frothed milk too cold from my Saeco Coffee Maker?
If the frothed milk from your Saeco Coffee Maker is too cold, try warming the cups with hot water before frothing the milk.
Why is coffee not hot enough from my Saeco Incanto HD8917?
If the coffee from your Saeco Coffee Maker is not hot enough, try warming the cups with hot water before brewing.
What does it mean when my Saeco Coffee Maker is in simulated working mode?
If your Saeco Coffee Maker is in simulated working mode, it is because the STAND-BY button has been pressed for more than 8 seconds. Turn the machine OFF and ON using the main switch.
How to fix coffee leaking from the coffee dispensing spout of Saeco Incanto HD8917 Coffee Maker?
If coffee is leaking from the dispensing spout of your Saeco Coffee Maker, the spout may be clogged. Clean the coffee dispensing spout and its holes using a toothpick.
Why does coffee has too little cream or is watery from my Saeco Coffee Maker?
If the coffee from your Saeco Coffee Maker has too little cream or is watery, the grinders may be set to a coarse position. Adjust the grinding fineness as described in the '5.3.3 Ceramic coffee grinder adjustment' chapter.
Why it is impossible to remove the brew group from my Saeco Coffee Maker?
If it is impossible to remove the brew group from your Saeco Coffee Maker, it could be incorrectly positioned. Close the service door. Turn the machine off and back on again. Wait for the 'Ready for brewing' signal and then remove the brew group.
What to do if brew group locked and cannot be taken out from Saeco Incanto HD8917 Coffee Maker?
If the brew group of your Saeco Coffee Maker is locked and cannot be taken out, it may be incorrectly positioned. Close the service door, turn the machine off and back on again. Wait for the 'Ready for brewing' signal, and then try removing the brew group.
Why does coffee come out so slowly from my Saeco Incanto HD8917?
If coffee comes out slowly from your Saeco Coffee Maker, it could be that the coffee is ground too finely. Try changing the coffee blend or adjusting the grinding as described in the '5.3.3 Ceramic coffee grinder adjustment' chapter.
Critical safety rules to ensure safe operation and prevent harm.
Warnings on appliance use, water, hot surfaces, and power cord handling.
Key advice on machine placement, materials, and temperature for safe use.
Covers critical operational warnings and electromagnetic field compliance.
Identifies all parts of the machine using numbered references.
Guides through unpacking, placement, and initial water tank filling.
Details filling bean hopper, powering on, and inserting hot water spout.
Guides on activating the AquaClean filter in the machine menu.
Instructions for removing and installing a new AquaClean filter.
Step-by-step guide for brewing coffee using whole beans.
Details on filling, installing, and preparing the milk carafe.
Steps for brewing cappuccinos, latte macchiatos, and milk froth.
Steps to start the descaling process when prompted by the machine.
Guides through the descaling solution dispensing and rinsing phases.
Explains the meaning of various warning icons displayed on the machine.
Provides a list of error codes and their corresponding causes and solutions.
Solutions for activation, replacement, and fitting issues with the AquaClean filter.
General| Water Tank Capacity | 1.8 L |
|---|---|
| Bean Container Capacity | 250 g |
| Milk Frother | Yes |
| Pump Pressure | 15 bar |
| Adjustable Coffee Strength | Yes |
| Weight | 7.2 kg |
| Built-in Grinder | Yes |
| Hot Water Dispenser | Yes |
| Removable Brewing Unit | Yes |
| Removable Water Tank | Yes |
| Color | Black |
| Power | 1850 W |
| Voltage | 230 V |
| Programmable | Yes |
| Adjustable Coffee Temperature | Yes |
| Removable Brew Group | Yes |
| Automatic Rinsing and Descaling | Yes |
| Cup Warmer | Yes |
| Number of Pre-Programmed Beverages | 6 |
| Grinder | Ceramic |
| Material | Plastic |
| Adjustable Grinder Settings | Yes, 5 settings |
To Next Page
