English
3
13
Maintenance Technician
In case of programming or setting up operations only the
Maintenance Technician can intervene by inserting the
relevant key into the safety switch and resetting the
voltage even if the door is open.
This operation, necessary
for starting up the vending
machine, disables the safety
system.
It must therefore be
carried out by qualified
personnel (Maintenance
Technician) aware of the
risks resulting from the
presence of live or moving
components.
3.5 Residual risks
Risk of scalding if hands are
placed inside the outlet
during brewing.
Before removing the cup
from the outlet, please
wait for the message
“REMOVE CUP” on
display.
Before brewing another
beverage, check that the
previous one has been
taken out and that the cup
support is empty.
To Next Page
Loading...
