Safeline MX2 - Configuration Method

11
SafeLine MX2 v.5.2.1 EN
Conguration
method
Remote programming
with external telephone
If the time between the
operation of two keys
exceeds 10 seconds, the
code has to be re-entered.
If the time exceeds 30
seconds, the call is discon-
nected or programming
mode is ended.
On-site programming
using the keyboard
Dial phone number
Multiple units connected
to phone line?
1 beep
(All MX2 answers)
Press unit no. [1-9]
repeatedly (until
recieving 3 tones)
3 beeps
(Requested unit answers)
Start programming
00
2 short beeps
(waiting for password)
Enter the password
*0000#
Valid password?
2 short beeps (entering
programming mode)
Continue programming?
Enter code and data, eg:
*11*012341234#
2 short beeps?
One long beep. Invalid
input. Last code has
to be re-entered.
Quit programming
*00*#
2 short beeps
Call disconnected or
end of programming
MX2 will restart with
the new settings
Start programming
00
Wrong password
(one long beep)