Safeline MX2 - Configuration Examples

13
SafeLine MX2 v.5.2.1 EN
Conguration
examples
1.Startconguration:
0 0
2. 1st phone number:
* 1 1 * 1 2 3 4 5 6 7 8 #
3. 2nd phone number:
*12*23456789#
4. Call type 1st number:
* 2 1 * 1 #
5. Call type 2st number:
* 2 2 * 1 #
6. Alarm button delay:
* 8 7 * 0 3 # - Example: 3 seconds delay.
7.Endconguration:
* 0 0 *#
SafeLine emergency telephones
Example 1: Storing of two different telephone numbers, both to
be answered as voice calls.
If at any time you need to
start over, use the factory
resetcommand*99*1#.
Please refer to the full
congurationsetupinthe
“Parameter list” as these are
merely examples.