Safetytest 1ST - Page 2

SAFETYTEST 1ST User Manual SAFETY
TEST
SAFETYTEST GmbH June 15
th
2015 Page 2 of 22
Texts, drawings and technical information were prepared with great care. However, errors
may still be present. The author and the manufacturer assume no direct or indirect liability for
any incorrect or incomplete descriptions or any damages that may occur.
The user manual should be read carefully and completely before using the tester.
Warning markings in the manual and on the clamp are meant to warn of risks or dangers.
Warning markings in the manual on the tester and on the accessories have to be adhered to
and describe the following:
General warning, warning of a danger!
See user manual!
Warning of hazardous electrical voltage!
Warning when exchanging fuses!
Warning of the risk of fire, e. g. when using improper fuses!