Safetytest 1ST - 2 Application; 3 Scope of Delivery and Accessories; Scope of Delivery (Standard); Accessories (Optional)

SAFETYTEST 1ST User Manual SAFETY
TEST
SAFETYTEST GmbH June 15
th
2015 Page 6 of 22
Earth bond tests and touch current tests in power systems are
only allowed in specific cases and when regarding the appropriate
safety precautions.
Note that large voltages may appear on appliances during tests,
e. g. by charged capacitors.
Only connect the appliance that is being tested to the power
socket once the power system is safe!
NOTE! When connecting the appliance to mains, hazardous
voltages may occur on a defective appliance or on conductive
parts which are not connected to PE.
2 Application
The tester “SAFETYTEST 1ST” is used for testing the electrical safety of appliances.
3 Scope of Delivery and Accessories
3.1 Scope of Delivery (Standard):
• 1 probe lead for R
PE
+ I
B
(2 m) (Art.-Nr.: 0003330)
• 1 user manual (English) on CD incl. . (Art.-Nr.: 0019800)
• 1 protocol software SAFETYDOC DEMO
• 1 power cord 1,8 m (Art.-Nr.: 0004520)
• 1 connector cable 1ST (Art.-Nr.: 0009420)
3.2 Accessories (optional):
Accessories Material Number
SAFETYTEST DI40 Differential current clamp/current clamp 6733040
Safety Clamp 4 mm black 0001002
Brush probe 4 mm black for effective protective conductor measurements 0001001
Test lead with test probe 4 mm yellow 6462210
Kelvin probe 2 x 4 mm socket 5 m 0002840
Mete rotary power 16A 0037510
Mete rotary power 32A 0037520
Barcode scanner 0001190
Barcode printer 0002620
Transponder reader 0001008
Carrying case for accessories 6124910
3.3 Software (Optional):
Remote control and database software safety-remote Nr. 0001004
Protocol- and table software Nr. 0001005