Safran morphoaccess sigma lite - Contactless Card and PIN Authentication; Contactless Card Placement; PIN Entry Procedure

This document and the information therein are the property of Morpho, and must not be
copied or communicated to a third party without the prior written authorization of Morpho.
26
Contactless Card Position – PIN Input
Authentication of the user is initiated by the detection of a
user card by the (optional) contactless card reader.
The terminal reads the user data stored in the card (at
least the User ID), and starts authentication process, as
required by terminal settings
When defined by terminal settings, the user is required
to enter his PIN code, once during enrolment process,
and at each authentication (in addition or instead of
biometric check).
The PIN code is entered using a numeric keypad
displayed on the (optional) LCD touch screen.
Place RF card in
front of contactless
card reader
Contactless Card Position Input PIN (MorphoAccess
®
SIGMA Lite+)
MorphoAccess® SIGMA Lite Series –
Quick User Guide - 2015_2000005700-V4
Step seven: capture basics