DIGITAL TERMINAL USER MANUAL
14
7.3. Audio settings
Access this screen from the MENU key, then "Terminal settings" and "Audio settings".
• To adjust the terminal's volume setting, position the cursor on "-" or "+" to lower or raise the volume and
press the OK key.
• If you have HOME CINEMA equipment, set "Dolby AC3" to "Yes".
• If you are using the HDMI or DIGITAL AUDIO connector, set "Dolby AC3" to "YES".
• You can memorise the settings by pressing the "OK" button.
AUDIO SETTINGS
DOLBY AC3 on digital output output
Yes No
CANCELDEFAULT VALUES OK
Digital audio output level
MIN MAX
-+
Dolby digital adjusting
MIN MAX
-+
LU 252744938B ITD81 HD EN.book Page 14 Mercredi, 7. juin 2006 6:31 18
To Next Page
Loading...
