Sagem MYC2-3 User Manual

44 Security
Phone code
The phone code is a secret code intended to protect the phone if stolen.
The
Phone code menu allows you to activate the phone code so that it is requested and checked whenever the phone is
switched on if a different SIM card is used. This code is automatically linked to the SIM card installed when the phone is
activated.
To activate or deactivate the phone code, select the
Phone code menu and [ Select ].
Enter 0000 and [
OK ].
Select
Activate or Deactivate and [ OK ].
To modify the phone code, select
Modify and [ OK ].
Enter old phone code and [
OK ].
Enter new phone code and [
OK ].
Enter phone code again to verify it and [
OK ].
Confidentiality
The Confidentiality function is used to delete numbers stored in View last calls and the SMS stored in the memory when a
new SIM card is inserted into the phone.
From the
Security menu, select the Confidentiality menu and [ Select ].
Choose
Messages or Calls .
Select
Activate or Deactivate and [ OK ].
Operator code
This menu allows you to modify the call barring.
From the
Security menu, select the Operator menu and [ Select ].
Access to this service depends on your type of subscription.
252211278_myC2-3_en.book Page 44 Vendredi, 12. août 2005 1:27 13

Sagem MYC2-3 Specifications

General

Brand	Sagem
Model	MYC2-3
Category	Cell Phone
Language	English