SAGEMCOM C112 ECO - Adjusting the Contrast; Adjusting the Volume of the Ring Tone; Modifying the Ring Tone; Activating; Deactivating Key Beeps

25
ADJUSTING THE CONTRAST
Do this if you cannot read the screen display.
• Go to Phone setting / LCD Contrast.
• Select the level of contrast you want using
the keys or .
• When the required level is obtained, press to confirm.
ADJUSTING THE VOLUME OF THE RING TONE
• Go to Phone setting / Ring level.
• Adjust the volume level (High / Medium / Low / Off) using keys
or .
• Press , to confirm.
MODIFYING THE RING TONE
• Go to Phone setting / Ring melody.
• 8 ring tones are available. Select a ring tone using
keys or .
• Press to confirm.
ACTIVATING / DEACTIVATING KEY BEEPS
• Go to Phone setting / Key tone.
• Modify the setting using keys or .
Press to confirm.
When you activate the silence mode, there is no
particular icon displayed on the telephone screen.
When choosing the ring, the sound of your phone is
very low. Get closer to the device to better listen to
the selected tone.