- 28 -
10-3-2 Programming a recording using the programme guide
Press the key to access the electronic programme guide.
Select the channel and the programme to record (to know how to navigate in the guide, see “Electronic
programme guide”, page 20).
Once the programme is selected, press the key.
The programme then appears framed in red.
To cancel the programming, press the key.
You can view and modify the recording settings in the Recording timers menu (see “Recording
programmes using the menu”, page 25).
10-4 RECORDING LIST
To access the recordings list, press the key.
You can also access it by pressing , then by selecting RECORDING LIST .
Your receiver is equipped with a hard disk (identified as HDD-V). You will be able to create folders to
organise your recordings, and control the disk space available.
The window on the left displays the existing
folders and recorded programmes.
To scroll over the list of folders and recordings
from one page to another, use the and
keys.
Use the and keys to select a
folder or a recording.
To open a selected folder and access the
recordings that it contains, press the key.
To play the selected recording, press the key.
In reading mode, the following actions are available:
- use , , and to move within the recorded programme.
- press to stop and return to the recording list.
To close the recording list and exit this menu, press the key.
DTR67_ EN.book Page 28 Mardi, 20. avril 2010 2:46 14
To Next Page
Loading...
Need help?
General
