User Manual
29
– - DSL: If the DSL is disconnected, the 3G starts to dial.
– - IP connectivity: If the system fails to ping the specified IP
address, the 3G starts to dial.
After finishing setting, click the Apply/Save button to save the settings.
You may also click the Auto Setting button to automatically configure the 3G
connection.
5.3 Wireless
Choose Wireless and the submenus of Wireless are shown as below:
5.3.1 Basic Settings
Choose Wireless > Basic to display the following page. In this page, the figure in
the right area is 2-dimensional code. It includes the wireless SSID and password.
You can obtain the wireless SSID and password through scanning this figure.
To Next Page
Loading...
Need help?
General
