Reset Gateway.
There are two methods for resetting the gateway.
1. Using a paper clip press for several seconds the gateway’s reset button located below the power
button.
2. Log into the gateway, go to Advanced/Gateway Settings/Maintenance/Resets and click on reset.
Turn Wi-Fi OFF or ON.
There are two methods
1. Wi-Fi Switch front of gateway
To turn Wi-Fi of press and hold the Wi-Fi switch located on the front panel until the green Wi-Fi
light goes off. It will blink for about 1second when Wi-Fi has been turned Off
To turn Wi-Fi back on pressing the Wi-Fi button the light turns green.
If Wi-Fi is turned off in GUI the Wi-Fi light being green does not indicate Wi-Fi is on
2. GUI interface.
Connect to Gateway via a LAN port.
Log into the gateway and click on Wi-Fi
The 2.4Ghz band is preselected.
Click on the Enable switch to toggle it to Off or On
Click on apply
Repeat the procedure for 5Ghz, Guest_2.4Ghz and Guest_5GhzClick
To Next Page
Loading...
