Bridge Mode.
In bridge mode the phone doesn’t work and you can’t log into the modem. A factory reset is require to
disable bridge mode resulting in loss of all settings.
Log into the gateway.
Click on Advanced
Click on Gateway
Click on Bridge Mode
Click on the Enable switch to toggle it to on.
Click on apply,
A warning message will pop up. Click on Yes.
The Gateway will reboot in bridge mode. The phone light will be off and the online light will be blue.
It is possible to log into Gateway in Bridge Mode using these instructions here.
http://www.dd-wrt.com/wiki/index.php/Access_To_Modem_Configuration
I have never tried this myself.
Dynamic DNS
There are two locations for setting up Dynamic DNS.
1. Services/Dynamic DNS
2. Advanced/Gateway Settings/DynDNS
I will use the second location because it gives an indication when the service is working.
Click on the Enable switch to toggle it on.
Select your provider from the drop down box.
Enter the DDNS Username.
Enter the password.
To Next Page
Loading...
Need help?
General
