EasyManua.ls Logo

SAGEMCOM F@ST 5355 - Specifications; Known Limitations and Bugs

SAGEMCOM F@ST 5355
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
ADSL/ADSL2+/VDSL/VDSL2+ compatible
Dual-band concurrent Wi-Fi interfaces:
802.11n 2.4GHz (2x2)
802.11 ac 5GHz (3x3)
1 x Gigabit Ethernet WAN port
2 x 100 Mb/s Ethernet LAN ports
2 x USB 2.0 ports
Built-in DLNA allows for media sharing via an external hard drive connected to the USB ports
Push button WPS
Telstra Air compatible
DECT and VoIP capabilities
Known Limitations and Bugs.
1. NAT Loop Back not supported.
2. VPN not supported.
3. Cannot remotely access Media connected to USB ports.
4. Trouble on some gateways changing IP address of gateway and DHCP IP address range.
5. Address Reservation Error (See Address Reservation) and maximum number of reserved
addresses is 15, also reserving an address doesn’t stop other devices using that address.
6. Wi-Fi power level adjustment does not work. Changing level does not effect output power.
7. Wi-Fi light could be on but Wi-Fi could be turned of in GUI.
8. “Operation cannot be completed error”. When this error keeps on appearing the only way to get
rid of it is to power the gateway Off and then back On.
9. Gateway does not transmit calling ID to some handsets

Related product manuals