pressure (ABS or REL), outdoor temperature and humidity
(feels like or dew point) and indoor temperature and humidity
.
Press the MAX/MIN/- key for three seconds to clear all Max
values.(Rainfall, wind speed, wind gust, pressure, UV and
Sunlight, temperature and humidity maximum values).
Press the SNOOZE key to exit the min/max checking and reset
mode, return to normal display mode.
Note: The Maximum values will display the current values
after reset.
7.5.2 Min Record Viewing and Reset
Press the MAX/MIN/- key again (do not hold), the MIN icon will
be displayed. Press the SET key to view min values of
pressure (ABS or REL), outdoor temperature and humidity
(feels like or dew point), and indoor temperature and humidity
.
Press the MAX/MIN/- key for three seconds to clear all Min
values.(pressure, temperature and humidity minimum values).
Press the SNOOZE key to exit the min/max checking and reset
mode, return to normal display mode.
Note: The Minimum values will display the current values
after reset.
To Next Page
Loading...
