Move the display console
around electrical noise
generating devices, such as
computers, TVs and other
wireless transmitters or
receivers.
Move the remote sensor to a
higher location. Move the
remote sensor to a closer
location.
Indoor and Outdoor
Temperature do not agree
Allow up to one hour for the
sensors to stabilize due to
signal filtering. The indoor and
outdoor temperature sensors
should agree within 2°C/4°F)
(the sensor accuracy is ±
1°C/2°F)).
Use the calibration feature to
match the indoor and outdoor
temperature to a known
source.
Indoor and Outdoor Humidity
do not agree
Allow up to one hour for the
sensors to stabilize due to
signal filtering. The indoor and
outdoor humidity sensors
should agree within 10 % (the
To Next Page
Loading...
