EasyManua.ls Logo

Sainlogic WS0310 - Set (Program) Mode

Sainlogic WS0310
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 22 -
1. Time, Time/Week and Second. Press the CHANNEL/+ or
MAX/MIN/- key to toggle between time, time/week and second.
2. Rainfall. Press the CHANNEL/+ or MAX/MIN/- key to toggle
between rate, 24h, week, month and total.
To clear the total rain, press the CHANNEL/+ or MAX/MIN/-
button until total rain is displayed. The total rain will flash.
Press and hold the SET button for five seconds until total rain
reads 0.0.
3. Outdoor Dew Point. Press the CHANNEL/+ or MAX/MIN/-
key to toggle between AT Apparent Temperature) and dew
point.
4. Wind Average. Press the CHANNEL/+ or MAX/MIN/- key to
toggle between current, 2mins and 10 minutes.
5. Absolute Pressure and Relative Pressure. Press the
CHANNEL/+ or MAX/MIN/- key to toggle between absolute
pressure and relative pressure.
7.2 Set (Program) Mode
While in Normal Mode, press and hold the SET/MODE key
for at least three seconds to enter the Set Mode. The first
setting will begin flashing. You can press the SET/MODE key
again to skip any step, as defined below.
Note: In the Set mode, press the CHANNEL/+ key or
MAX/MIN/- key to change or scroll the setting value. Hold the
CHANNEL/+ key or MAX/MIN/- key for three seconds to
increase/decrease rapidly.
Note: To exit the Set mode at any time, press the SNOOZE
button of the display console.

Related product manuals