1. Time SYNC(default: ON). Press the SET/MODE key again
to set the network time sync. Press the CHANNEL/+ key or
MAX/MIN/- key to switch between SYNC time ON/OFF of
measure. Synchronize the time of the device with WiFi.
2. 12/24 Hour Format (default: 12h). Press the SET/MODE
key again to adjust the 12/24 hour format setting (FMT). Press
the CHANNEL/+ key or MAX/MIN/- key to change between 12
hour and 24 hour format.
3. Change Hour. press the SET/MODE key again to set the
hour. Press the CHANNEL/+ key or MAX/MIN/- key to adjust
the hour up or down. During afternoon hours the PM icon will
display.
4. Change Minute. Press the SET/MODE key again to set the
minute. Press the CHANNEL/+ key or MAX/MIN/- key key to
adjust the minute up or down.
5. Date Format (default: M-D). Press the SET/MODE key
again to enter the Day/Month format mode. Press the
CHANNEL/+ or MAX/MIN/- key to switch between M-D,D-M.
6. Change Month. Press the SET/MODE key again to set the
calendar month. Press the CHANNEL/+ key or MAX/MIN/- key
to adjust the calendar month.
7. Change Day. Press the SET/MODE key again to set the
calendar day. Press the CHANNEL/+ key or MAX/MIN/- key
to adjust the calendar day.
8. Change Year. Press the SET/MODE key again to set the
calendar year. Press the CHANNEL/+ key or MAX/MIN/- key to
adjust the calendar year.
9. Max/Min Clearing (default: ON). Press the SET/MODE
key again to set the Max/Min clearing mode (CLR). The
To Next Page
Loading...
