EasyManua.ls Logo

Sainlogic WS0310 - Sensor Search Mode; Max;Min Viewing and Reset Mode

Sainlogic WS0310
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 25 -
initial weather icon of Sunny, Cloudy, Partly Cloudy or Rainy.
(For detailed information of this part please refer to 10.2)
16. Sunlight Display Units (default: W/ ). Press the SET/
MODE key again to change the sunlight units of measure.
Press the CHANNEL/+ key or MAX/MIN/- key to toggle the
sunlight units between , W/
, fc or lux.
17. Location Division. (default: Northern Hemisphere).
Press the SET/MODE key again to change the location
division. Press the CHANNEL/+ key or MAX/MIN/- key to
toggle the position of the earth Northern Hemisphere (NOR) or
Southern Hemisphere (NOR). (Refer to 5.0 Final Installation
of Sensors)
7.3 Sensor Search Mode
If Integrated Outdoor Transmitter data is lost, touch and hold
the CHANNEL/+ button for 3 seconds, the search icon will be
displayed constantly for 3 minutes. Once the signal is
reacquired, the remote search icon will turn off, and the
current values will be displayed.
7.4 Max/Min Viewing and Reset Mode
7.4.1 Max Record Viewing and Reset
In normal mode, press (do not hold) the MAX/MIN/- key, the
MAX icon will be displayed in date area.
Press the SET/MODE key to view max values of rainfall (rate,
24h, week or month), wind gust and average, UV and sunlight,
pressure (ABS or REL), outdoor temperature and humidity (AT

Related product manuals