ENGLISH
9
1. The unit will not turn on
2. Wrong display on LCD
3. Illegal bidding
4. No response or improper
response
5. Display is dim
6. Computer rejects the
card you selected
SYMPTOMS POSSIBLE CAUSE WHAT YOU SHOULD DO
Batteries weak or dead
Batteries not inserted properly
Battery connectors contact poor
Batteries exhausted
Batteries exhausted
Batteries exhausted
Electrostatic discharge
Batteries weak
You do not have that card (eg.
card in dummy’s hand)
You are not following suit
Replace batteries. If problem persists, turn off
computer and press a pin into the hole
marked ACL (See sect. 5.2)
See page 1
Check battery connectors
Replace batteries. If problem persists turn off
computer and press a pin into the hole
marked ACL (see Sect. 5.2)
Replace batteries. If error persists, consult
Distribution Center
Replace batteries
Turn off computer. Press a pin into the hole
marked ACL (see sect. 5.2)
Replace batteries
Key in correct card
Key in correct card
5. Troubleshooting Guide
To Next Page
Loading...
