Chapter 2 Product Introduction
2.1 Application Scope of Products
The battery B1 is applied to domestic photovoltaic storage system. The
battery is built internally with a battery management system (BMS), which is
used to ensure efficiency of the battery and to avoid phenomena of
overcharge or over-discharge. The battery employs modular design for easy
installation and wiring, and can be used by up to 8 parallel devices. B1
battery is also called slave machine in the following text.
Figure 2.1 B1 exterior overview
2.2 Specification for Product Model
B1 – XX – XX
① ② ③
○
1
B1 represents for product name.
○
2
XX represents total energy capacity XXKWh，for instance, 5.1 means 5.1kWh.
○
3
XX represents voltage grade，for 48 means 48V.
To Next Page
Loading...
