SAJ R5-5K-T2 - Page 22

R5 Series
- 21 -
4.4.2 Drill Holes and Place the Expansion Tubes
According to the guides, drill 3 holes in the wall (in conformity with position
marked in Figure 4.6,Figure 4.7 & Figure 4.8 and then place expansion tubes in the
holes using a rubber mallet.
Figure 4.6 Drill holes’ dimensions of R5-4K/5K/6K/8K/9K/10K/12K-T2
比例
Figure 4.7 Drill holes’ dimensions of R5-13K/15K-T2