SAJ R5-5K-T2 User Manual

R5 Series
- 46 -
51/52/53
L1/L2/L3 Data Consistency of Voltage Error Slave
54/55/56
L1/L2/L3 Data Consistency of Frequency Error Slave
57
Data Consistency of GFCI Slave
58/59/60
L1/L2/L3 Data Consistency of DCI Slave
61/63/65
L1/L2/L3 Grid Voltage High Slave
62/64/66
L1/L2/L3 Grid Voltage Low Slave
67/69/71
L1/L2/L3 Frequency High Slave
68/70/72
L1/L2/L3 Frequency Low Slave
73/74/75
L1/L2/L3 Grid Lost Error Slave
76/77/80
PV1 /PV2/PV3 Voltage High Slave
78/79/82
PV1/PV2/PV3 Current High Slave
81
Lost Communication Between Display board & Control board
Master
83
Grounding Detect Error Master
84
PV Input Error Master
Table 7.1 Error Code
General troubleshooting methods for inverter are as follows:
Fault Information
Troubleshooting
Relay Error
If this error occurs frequently, please contact your distributor
or phone SAJ.
Storer Error
If this error occurs frequently, please contact your distributor
or phone SAJ.
Temperature High
Error
Check whether the radiator is blocked, whether the inverter
is in too high or too low temperature, if the above mentioned
are in normal, please contact your distributor or phone SAJ.
GFCI Device Error
If this error occurs frequently, please contact your distributor
or phone SAJ.
DCI Device Error
If this error occurs frequently, please contact your distributor
or phone SAJ.
GFCI Devices Error
If this error occurs frequently, please contact your distributor
or phone SAJ.
DCI Devices Error
Master
If this error occurs frequently, please contact your distributor
or phone SAJ.

SAJ R5-5K-T2 Specifications

General

Brand	SAJ
Model	R5-5K-T2
Category	Inverter
Language	English