Suntrio Plus Series
-41-
6.2.5 Inquiry of Parameters of Inverter
1. Inquiry of Operating Parameters
1. In the main LCD interface, press
“ENT” button, then press ▶ to
enter into “Parameters”.
2. Press ENT to enter into
“Run-Info”, then press ▼or▲to
select the needed parameters,press
ENT to enter and to check the
parameters.
2. Inquiry of the Information of Inverter
1. In the main LCD interface, press
“ENT” button, then press ▶ to
enter into “About”.
2. Press ENT to enter into “About”
to check the equipment type, series
number, machine code, software
version of display panel,
mainframe version of the control
panel and the settings of country.
Power
1230W
E-Today
11.33 kWh
T-Today
1.7 h
T-Total
4.6 h
15-07-09 15：47
Graph Setting
Run-Info
About
0
3.7
7.4
11.1
14.8
18.5
22.2
25.9
29.6
kW
33.3
3 5 7 9 11 13 15 17 19 21h
E-Total
14.35 kWh
E-Today 11.33 kWhNormal
DC-Parameters
Error-Records
Module-Inform
Exit
AC-Parameter
Power
1230W
E-Today
11.33 kWh
T-Today
1.7 h
T-Total
4.6 h
15-07-09 15：47
Graph Setting Run-Info
About
0
3.7
7.4
11.1
14.8
18.5
22.2
25.9
29.6
kW
33.3
3 5 7 9 11 13 15 17 19 21h
E-Total
14.35 kWh
E-Today 11.33 kWhNormal
To Next Page
Loading...
