Sako SKI780 - Page 22

6.1 Brief introduction of function code
PO Standard Function Parameters
Function Parameter '
Code Name Setting Range Default | Property
. Frequency upper limit | 0.00Hz ~~ maximum
pozIs offset frequency PO-10 O}ooHz *
0.00Hz ~ frequency
P0-14 | Frequency lower limit upper limit PO-12 0.00Hz Ww
Model
P0-15 | Carrier frequency 2.0kHz ~ 8.0kHz dependent Ww
Carrier frequency 0: No
P0-16 | adjustment with L y 1 Ww
: Yes
temperature
0.00s ~ 650.00s(P0-19=2) Model
P0-17 | Acceleration time1 | 0.0s ~ 6500.0s(P0-19=1) | , = A | o*
Os ~ 65000s(P0-19=0) SPEneen
0.00s ~ 650.00s(P0-19=2) Model
P0-18 | Decelerationtime1 | 0.0s ~ 6500.0s(P0-19=1) | , ° 4 | *
0s ~ 65000s(P0-19=0) epencen
0: 1s
p0:19 ference ant | FOS 7 *
2:0.01s
Frequency offset of
auxiliary frequency 0.00Hz ~~ maximum
po:24 source for X and Y frequency PO-10 O:00H2 *
operation
P0-22 Frequency reference 2: 0.01Hz 2 vs
resolution
Retentive of digital
: 0: Not retentive
P0-23 | setting frequency 1 Retentve 0 Ww
upon power failure
www sakohzcom/ 16