Sako SKI780 - Page 36

6.1 Brief introduction of function code
P6 Start/Stop Control
Function| Parameter q
Code Name Setting Range Default | Property
0: Direct start
1: Rotational speed tracking restart
PEDO | Startmode 2: Pre-excited start (asynchronous o *
motor)
Rotational 0: From frequency at stop
P6-01 | speedtracking | 1: From power frequency 0 *
mode 2: From maximum frequency
Rotational
P6-02 | speedtracking | 1~ 100 20 Ww
speed
Startup
P6-03 0.00Hz ~ 10.00Hz 0.00Hz *
frequency
Startup
P6-04 | frequency 0.0s ~ 100.0s 0.0s *
holding time
Startup DC
braking current/
P6-05 0% ~ 100% 0% *
Pre-excited
current
Startup DC
P6-06 | braking time/ 0.0s ~ 100.0s 0.0s *
Pre-excited time
www sakohzcom/ 30