Salus RT500RF User Manual

RT500RF INSTRUCTION MANUAL
4
INTRODUCTION
A programmable thermostat is a device
that combines the functions of both a
room thermostat and heating controller
into a single unit. The programmable
thermostat is used to switch the heating
system in your home on and off as
needed. It works by controlling the
temperature according to a series of
programmed settings that take effect at
different times of the day.
The RT500RF from Salus Controls is a stylish and accurate 5/2 or 7 day
programmable electronic thermostat with a large, easy to read Liquid Crystal
Display (LCD). This programmable thermostat has been specifically designed to
be used for both Volt Free and AC heating applications. This programmable
thermostat can replace most common residential thermostats and is designed
to be used with electric, gas or oil heating control systems. Unlike ordinary single
unit design thermostats, this is a new type of thermostat separating the
operational functions into two units.
The Receiver is used for wiring connections and heat on/off control. The Control
Centre provides the user interface and temperature sensing / control. The two
units are linked together by a Radio Frequency (RF) signal.
Features
•
Volt free switching option
•
5/2 or 7 day programming flexibility
•
Built-in start up programming for quick installation
•
Frost protection
•
Large, easy to read LCD with blue backlight
•
Burner on symbol
•
Easy to use programming
•
User friendly
Salus RT500RF Manual:89 9/7/10 10:10 Page 4

Salus RT500RF Specifications

General

Frequency	868 MHz
Power Supply	2 x AA batteries
Display	LCD
Communication	RF
Range	Up to 60 meters in open space
Type	Wireless
Temperature Range	5°C to 35°C
Compatibility	Boilers, Combi Boilers