Sam 271 - Electrical Immunity and Emissions

30 Product Support 1-888-202-9831
E. ELECTRICAL IMMUNITY AND EMISSIONS
The following components of the sam Ultrasonic Diathermy Device are
compliant with the requirements of IEC 6060112 ed 3.0 (200703):
sam Model 271
Cable Length
AT271: Ultrasound Applicators
PC271: Power Controller 48 inches
+
1.2
CT271: Electrical Charger 70.8 inches
+
3.8
YB271: Y-branch Adapter 8 inches
+
.6 x 2
Guidance and Manufacturer’s Declaration – Emissions
Emissions Test Compliance Electromagnetic Environment – Guidance
RF Emissions Group 1 The sam uses RF energy only for its internal
CISPR 11 function. Therefore, its RF emissions are very low
and are not likely to cause any interference in
nearby electronic equipment.
RF Emissions Class B The sam is suitable for use in all establishments,
CISPR 11 including domestic, and those directly connected
to the public low-voltage power supply network
that supplies buildings used for domestic
purposes.
Harmonics Class A
IEC 6100032
Flicker
IEC 6100033