Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU Program Mode Programming • 237
Program 1400 - Scale Tare Weight Programming
A tare is the amount of weight representing the container, or package when items are sold by weight.
You can pre-program five tare weights, representing the weight of different containers. When you
place an item and a container on optional scale, you can enter the tare number to automatically
subtract the pre-programmed tare weight. If you choose to use tare #5 for manual tare weight entry,
do not enter a weight for tare #5. (See TARE.)
Programming the Scale Tare Weight
1. Turn the control lock to the PGM-Mode.
Switch to P Mode by press MODE function key. (For ER-230)
2. To begin the program, enter 1 4 0 0, press the SUBTL key.
3. Enter the number (1-5) of the tare you wish to program; press the X/TIME key.
4. Enter the weight of the tare (one digit preceding the decimal key, the decimal key, then
three digits after the decimal key). Press the SUBTL key.
5. To program additional tare weights, repeat from step 3, or press the CASH key to
finalise the program.
4 0 0 SUBTL1
X/TIME
SUBTL
.
CASH
To Next Page
Loading...
