Sam4POS 6600/4800II Operators Manual v2.9 Advanced Application Operations • 119
4. Enter the number or name for the
new check (up to 10 digits) and
press OK.
5. Touch the MOVE TO THIS
CHECK button on the new check;
the selected items will now appear
on the new check.
6. Alternately, you can press EXIST
OPEN to add the items to an
existing check in the system:
7. Select the desired check in the
system to add the selected item to,
press OK.
8. Press the MOVE TO THIS CHECK button on the selected check to move the selected items.
9. Continue to move items as needed. Note that you can also move items back to the original check if necessary.
10. When you have finished moving all the items, press SAVE to save the changes. Pressing CANCEL will exit the
operation without making any changes.
To Next Page
Loading...
