136 • Advanced Application Operations Sam4POS 6600/4800II Operators Manual v2.9
Dynamic Table Map
The table map allows you to create multiple tables in a grid formation for table service operations. When the
option DYNAMIC is selected in the table map, configuration settings are provided for the Table Map to allow
customizing table positions.
This option is controlled by the setting in Program Mode > Options > Options > System Option: Show Dynamic
Table Check Box On Reg Mode
Using Dynamic Table Map
1. Open the Table Map and select a table
seating zone.
2. Press the DYNAMIC check box; with the
Dynamic selection selected, the table are
display as per the layout set in the Program
Mode\Screen Edit\Table Map.
3. All table map operation remain the same,
only the appearance is affected.
To Next Page
Loading...
