Sam4POS 6600/4800II Operators Manual v2.9 Advanced Application Operations • 123
Transfer Table
If permitted by authority level programming, an employee is allowed to move a check to a different Employee.
This can be done multiple times, if necessary.
1. Sign on employee and press the TRANSFER TABLE key.
2. Select the checks from the list you wish to transfer.
a. Press SELECT ALL if you want to transfer all of the checks listed.
b. Press DESELECT ALL if you decide not to transfer all check.
Checks selected for
transfer are highlighted
3. Press the TRANSFER CHECK button.
4. Choose the employee from the list you wish to transfer the checks to.
To Next Page
Loading...
