194 • Program Maintenance Sam4POS 6600/4800II Operators Manual v2.9
Quick PLU – Add New PLU
1. From the PROGRAM MODE main menu screen select PLU then select Quick PLU. The main
Quick PLU selection screen is displayed:
2. In the ‘Input PLU Code’ field, Type in the number for the new PLU or scan the new item; press OK.
3. The NEW PLU dialog appears
• Input Name – Type a name for the new PLU.
• Stock – Enter the stock quantity if the item is a stock item.
• Price Level \ Price – Select the Price level and enter the price for the level.
• OK – Adds the new PLU to the database and returns to the main Quick PLU screen:
* CANCEL – Exits the new PLU entry dialog without adding the item.
* OK AND CONTINUE – Adds the new item then returns to the NEW PLU entry
dialog to allow entry of another new PLU.
* OK AND NEXT PLU – Adds the new PLU and returns to the NEW PLU entry dialog
with the next available PLU number already selected.
* OK AND EDIT – Adds the new PLU to the database, then loads the PLU
programming screen for further editing of the new PLU.
To Next Page
Loading...
