SaMASZ KDT 260 User Manual

41
OPERATOR’S MANUAL
DISC MOWER
KDT
Fig. 36. Point of oil inspection and manner of oil replacement in cutterbar
Tab. 6. Oil capacities
Model
Oil capacity [l]
Oil type
Lubrication frequency
KDT 180
3,5
80W90
After first 50 h of operation and then
after next 500 h (or at least once a
year)
KDT 220 S/W
4,5
KDT 260 S (SL)/W
5,0
KDT 300
6,0
KDT 340
6,5
KDT 341
7.2. Axis gear
Everyday before starting work please check the oil level and, if needed, please refill after having
removed the vent A on the top of the gear (Fig. 37). The oil level can be checked through the check
opening B on the side of the gear. Please refill the oil until it is visible in the check opening B. The oil
capacity: about 1 l.
Tab. 7. Oil capacities in axis gear
Model
Oil
capacity[l]
Oil type
Lubrication frequency
All types
1
Transol 680÷1000
(acc. to ISO 3448
oil viscosity grade:
VG-680 – 1000)
After first 50 h of
operation and then after
next 500 h (or at least
once a year)
Fig. 37. Control points and oil change method in axis gear
CAUTION:
The above instructions should be strictly followed. If the discs in the cutterbar
rotate loosely, do not worry about the high intersecting axis gear temperature;
after long working time it may reach even 100
o
C.
A
B
A
B

SaMASZ KDT 260 Specifications

General

Brand	SaMASZ
Model	KDT 260
Category	Farm Equipment
Language	English