Fig. 8 - Timing the epicyclic speed reducer of the AGROSHIFT unit.
— Fit the MEDIUM hub R p/n 009.7649.0/10, securing with the respective circlip and compacting the belleville discs
M with the relative press.
— Fit the MEDIUM actuator piston S p/n 008.5669.0, having first located the relative O-rings.
— Working at the bench, preassemble the friction discs of the MEDIUM - LOW housing T p/n 007.6744.3 (fig 10).
Align the discs initially using the housing itself as a reference, then compress the belleville discs U p/n 2.1499.127.0.
— Position the MEDIUM - LOW assembly in the housing N applying sealant (Pianermetic 510) to the mating surfaces.
— CAUTION : take care when applying sealant not to foul the clutch oil inlet ports.
— Fit the planet carrier assembly to the shaft L, position the hub V p/n 008.0213.0 and fit the circlip Z.
— Fit the cover W p/n 007.6198.0 (fig 7), applying sealant (Pianermetic 510) to the mating surfaces.
Fig. 10 - Preassembly of MEDIUM-LOW clutches
MEDIUM-LOW.
Fig. 9 - Preassembly of parts on MEDIUM shaft.
timing reference countermark
clutch transmission
agroshift
27
2
124
www.maskinisten.net
www.classicmachinery.net
To Next Page
Loading...
